Learn How to Replace a Tire!
April 9, 2020 2:02 am Leave your thoughtsGetting a flat tire is every driver’s worst nightmare, especially if it happens while you’re driving. Not only is getting a flat a scary experience, but we’ve found that many drivers also don’t know how to replace a tire in Chino, CA. If that sounds like you, then keep reading—this post will give you an overview of the process of swapping out your flat tire:
- Find a safe location: If you get a flat while driving down the road, be sure to pull over to a safe spot as far away from traffic as possible. Ideally, you’ll want to find a level spot, because it will prevent your car from rolling.
- Set the parking brake: Speaking of avoiding rolling, be sure to set your parking brake! Neglecting this step can result in some serious injuries and significant vehicle damage.
- Loosen lug nuts: Use the lug wrench to turn the lug nuts counterclockwise. Only loosen them 1/4 or 1/2 of a turn for now. They may be stuck on pretty tight, so use your full body weight if necessary.
- Raise the vehicle: With the jack placed beneath the frame by the flat tire, slowly raise your car about six inches off the ground. Your owner’s manual probably has more information about using the jack during car tire replacement in Chino, CA.
- Unscrew the lug nuts: With the car raised up, you can finish unscrewing the lug nuts. Since they’re already loose, you may be able to do this by hand without needing a wrench.
- Remove the flat: Grab the flat tire by the treads and gently pull it toward you until it’s free from the hub. Be sure to set the tire on its side so it doesn’t roll away.
- Mount the spare: Now it’s time to replace a tire in Chino, CA! Place the spare tire on the hub by lining the rim with the lug bolts. Push the spare until the bolts pass through the rim.
- Tighten the lug nuts by hand: With the tire all the way on, place the lug nuts back on the bolts and start tightening them by hand. Tighten each one as hard as you can for now; you’ll finish tightening them with the wrench once the car is back on the ground.
- Lower the vehicle and finish tightening lug nuts: Use the jack again to slowly bring your car back to ground level. Once it’s back down, tighten all of the lug nuts as hard as you can using the wrench—we don’t want your spare falling off your vehicle!
- Bring your car to a pro: Keep in mind that a spare tire is only meant to be a temporary replacement! Take your car to a mechanic as soon as you can to get a new permanent tire for your vehicle.
Car tire replacement in Chino, CA shouldn’t take more than 30 minutes or so, but if you’d rather call a pro for roadside assistance than attempt it yourself, be sure to choose Gabriel’s Automotive & Towing. We offer fast and affordable roadside assistance for all sizes of cars, trucks and SUVs.
Categorised in: Tires in Chino CA
This post was written by Writer